Induction Unit for suspended ceiling

layer

DID600B-L

 

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems

  • Preferably for room heights up to 4.20 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • High comfort levels due to low airflow velocity in the occupied zone
  • Three nozzle variants to optimise induction based on demand
  • Side entry or top entry primary air spigot
  • Removable induced air grille


Optional equipment and accessories

  • Control package
  • Also available as supply and extract air combination
  • Choice of two types of light fitting, or installation opening for light fitting to be installed by others
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC or NCS

Kühlleistung: bis 1.460 W Heizlesitung: bis 1.725 W

read more

layer

DID-R

 

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems. The condensate drip tray is useful if the temperature temporarily falls below the dew point.

  • Preferably for room heights up to 4.20 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • High comfort levels due to low airflow velocity in the occupied zone
  • Three nozzle variants to optimise induction based on demand
  • Circular or square diffuser face


Optional equipment and accessories

  • Control package
  • Casing powder-coated black
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC or NCS

Kühlleistung: bis 500 W Heizleistung: bis 1.200 W

read more

layer

DID604

 

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems. The condensate drip tray is useful if the temperature temporarily falls below the dew point.

  • Preferably for room heights up to 4.20 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • High comfort levels due to low airflow velocity in the occupied zone
  • Three nozzle variants to optimise induction based on demand
  • Removable induced air grille, fixed with magnets


Optional equipment and accessories

  • Control package
  • Adjustable air control blades to control the airflow
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC or NCS

Kühlleistung: bis 1.330 W Heizleistung: bis 1.115 W

read more

layer

DID632

 

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems

  • Preferably for room heights up to 4.20 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • Four nozzle variants to optimise induction based on demand
  • Hinged, removable induced air grille in four designs


Optional equipment and accessories

  • Control package
  • Also available as supply and extract air combination
  • Adjustable air control blades to control the airflow
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC or NCS

Kühlleistung: bis 2.450 W Heizleistung: bis 2.970 W

read more

layer

DID 614

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems.

  • Preferably for room heights up to 4.20 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • High comfort levels due to low airflow velocity in the occupied zone
  • Five nozzle variants, including a variant with adjustable twin nozzles, to optimise induction based on demand
  • Removable induced air grille, fixed with magnets, with decreasing apertures towards the edges

 

Optional equipment and accessories

  • Control package
  • Adjustable air control blades to control the airflow
  • Powder coating in many different colours, e.g. RAL CLASSIC or NCS

read more

layer

DID312

 

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems. The condensate drip tray is useful if the temperature temporarily falls below the dew point.

  • Preferably for room heights up to 4.20 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • High comfort levels due to low airflow velocity in the occupied zone
  • Three nozzle variants to optimise induction based on demand
  • Hinged, removable induced air grille in four designs


Optional equipment and accessories

  • Control package
  • Also available as supply and extract air combination
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC or NCS

Kühlleistung: bis 1.830 W Heizleistung: bis 1.240 W

read more

layer

DID300B

 

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems

  • Preferably for room heights up to 4.20 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • High comfort levels due to low airflow velocity in the occupied zone
  • Three nozzle variants to optimise induction based on demand
  • Side entry or top entry primary air spigot
  • Removable induced air grille


Optional equipment and accessories

  • Control package
  • Also available as supply and extract air combination
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC or NCS

Kühlleistung: bis 1.290 W Heizleistung: bis 1.690 W

read more

layer

DID642

Active chilled beam for heating and cooling, with 2-pipe or 4-pipe heat exchanger, for integration with various ceiling systems

  • Preferably for room heights up to 4.0 m
  • High heating and cooling capacity with a low conditioned primary air volume flow rate and low sound power level
  • Five nozzle variants to optimise induction based on demand, including adjustable twin nozzles, i.e. one pair of nozzles with different diameters
  • Hinged, removable induced air grille in two designs


Optional equipment and accessories

  • Control package
  • Additional casing for both supply air and extract air, or for additional supply air
  • Supply air and extract air units upon request
  • Adjustable air control blades for air direction control
  • Heat exchanger powder-coated black
  • Powder coating in many different colours, e.g. RAL CLASSIC
  • With an extended border also suitable for freely suspended installation

read more

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34