img_pro_001388.png
Mini Pleat filter cartridge, type MFCA

doc_graphic_000009.png
Tested to VDI 6022

Conforms to VDI 6022

img_pro_001388.png
doc_graphic_000009.png

MFCA

Compact construction for special applications


 

Final filters for the separation of suspended particles to meet the highest requirements

  • Filter classes E11, H13
  • Performance tested in accordance with EN 1822-1 and ISO 29463-2 to ISO 29463-5
  • Filter media for special requirements, glass fibre papers with spacers made of thermoplastic hot-melt adhesive
  • Low initial differential pressure due to ideal pleat position and largest possible filter area
  • Meets the hygiene requirements of VDI 6022

 

 

 


Updating order code
Save configuration
Calculate price
Updating technical data
  • Media
Specification text:
Updating specification text
Show complete text Hide complete text
Initialize order code

Introduction

Application


  • Mini Pleat filter cartridges type MFCA for the separation of suspended particles such as aerosols, toxic dusts, viruses, bacteria from the supply and extract air in ventilation systems.
  • Particulate filter: Main or final filter used for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering

Special characteristics

  • Leakage test, standard for all particulate filters of filter class H13


Nominal sizes

  • D × H [mm]


Description

Filter classes

Filter groups


  • EPA according to EN 1822
  • HEPA according to EN 1822

Filter classes
• E11
• H13

Construction
  • AL: Casing made of aluminium

Construction features

  • Cylindrical design
  • Casing made of perforated sheet metal, aluminium
  • As standard, the filter cartridge is fitted with a continuous seal on the upstream side


Materials and surfaces

  • Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Joint sealing compound made of permanently elastic two-component polyurethane adhesive
  • Casing made of aluminium

Standards and guidelines
  • Testing of particulate filters to EN 1822 (EPA, HEPA and ULPA filters): European standard for the testing of filtration performance in the factory, particle counting method using a liquid test aerosol
  • Uniform classification of particulate filters according to efficiency, using a test aerosol whose average particle size lies within the minimum efficiency (MPPS)
  • Particulate filters are classified according to the values determined for the local filtration efficiency and the overall filtration efficiency as EPA (filter classes E10, E11, E12), HEPA (filter classes H13, H14) or ULPA (filter classes U15, U16, U17)


Technical information

Technical Data, Specification Text, Order Code

  • TECHNICAL DATA
  • SPECIFICATION TEXT
  • ORDER CODE

Filter class according to EN 1822E11H13
Efficiency [%] according to EN 1822> 95> 99.95
Initial differential pressure [Pa] at nominal volume flow rate100200
Recommended final differential pressure [Pa]450600
Max. operating temperature [°C]8080
Maximum relative humidity [%]100100


Specification text

Mini Pleat filter cartridges MFCA for the separation of suspended particles such as aerosols, toxic dusts, viruses and bacteria from the supply and extract air in ventilation systems. Use as particulate filters, i.e. main or final filters, for the most critical requirements of air cleanliness and sterility in areas such as industry, research, medicine, pharmaceuticals, and nuclear engineering. The filter media are made of high-quality, moisture-resistant glass fibre papers, with spacers made of thermoplastic hot-melt adhesive. Low initial differential pressure due to ideal pleat position and largest possible filter area. Mini Pleat filter cartridges are available in standard sizes, filter classes E11, H13. As standard, Mini Pleat filter cartridges are fitted with a continuous seal. Hygiene conformity in accordance with VDI 6022.

Special characteristics
  • Leakage test, standard for all particulate filters of filter class H13


Materials and surfaces
  • Filter media made of high-quality, moisture-resistant glass fibre papers, pleated
  • Spacers provide a uniform spacing of the pleats
  • Joint sealing compound made of permanently elastic two-component polyurethane adhesive
  • Casing made of aluminium


Materials and surfaces

  • AL: Casing made of aluminium

Sizing data
  • Filter class [EN 1822]
  • Volume flow rate [m³/h]
  • Initial differential pressure [Pa]
  • Nominal size [mm]

 

 


MFCAH13AL / 175 × 280
||||
1234


1 Type

MFCA Mini Pleat filter cartridge

2 Filter class
E11
Particulate filter according to EN 1822
H13 Particulate filter according to EN 1822

3 Construction
AL
Casing made of aluminium

4 Nominal size [mm]
D × H


MFCA–H13–AL/175×180
Filter class H13 particulate filter according to EN 1822
Construction Casing made of aluminium
Nominal size 175 × 280 mm



   

Dimensions

  • DIMENSIONS


Dimensional drawing of MFCA doc_techdraw_001537.png

D [mm]H [mm]Filter classqv [l/s]qv [m³/h]ΔpA [Pa]kg
175177E11361301001,30,5
175227E11471701001,70,8
175280E11562001002,11,1
175177H13361302001,30,5
175227H13471702001,70,8
175280H13562002002,11,1

Downloads

product information

certificates

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34