Smoke Control Damper

layer

EK-JZ


Rectangular smoke control dampers including ventilation function with low installation depth and large cross section area for smoke and heat exhaust via mechanical smoke extract systems, for the provision of additional supply air, and in pressurised ventilation systems


  • Nominal sizes 200 × 230 - 1200 × 2030 mm, for smoke gas volume flows up to 36540 l/s or 131544 m³/h at 15 m/s, upstream velocities up to 20 m/s possible
  • Actuator accessibility optionally in air direction or on the side
  • Simple and quick installation in and on components
  • Casing, damper blades and actuator encasing made of calcium silicate
  • Pressure level 2 (operating pressure -1000 to 500 Pa)
  • Automatic release (AA), option of manual override (MA)
  • For smoke extract ducts from 35 mm wall thickness
  • Closed blade air leakage acc. to EN 1751, class 3
  • Casing air leakage acc. to EN 1751, class C

Optional equipment and accessories


  • Cover grille (various constructions)
  • Connecting subframe for calcium silicate and sheet steel smoke extract ducts
  • Integration into the central BMS with TROXNETCOM
  • External encasing for associated fire-tested control or communication modules
  • Coating for use in exterior wall areas
  • Cmod = for smoke extract and ventilation function in combined systems, which allows for pneumatic flow rate balancing possible by taking intermediate positions

read more

layer

EK-JS

Rectangular sheet steel smoke control damper including ventilation function for the removal of smoke and heat in smoke extract systems, as well as for the controlled flow of the necessary supply air. Suitable as a support for keeping safety rooms and their anterooms smoke-free in pressurised ventilation systems (DBA), e.g., in fire brigade lift shafts or for smoke removal in escape tunnels.


  • Can be used in discharge environments with elevated temperatures of up to 600 °C at tested smoke extract ducts and sheet steel ducts
  • Meets pressure level 3 with any airflow direction and automatic release (AA)
  • Nominal sizes 100 × 100 – 1250 × 2560 mm
  • Volume flow rate of 360 m³/h or 100 l/s – 115110 m³/h or 31975 l/s at 10 m/s
  • Design in sheet steel (also powder-coated according to RAL-CLASSIC chart) or stainless steel sheet in A4 quality
  • According to EN 1751: Leakage air flow with closed damper at least class 2 and casing leakage air flow class B, from nominal sizes 840 × 480 leakage air flow with closed damper 3 and casing leakage air flow class C
  • Integration into the central BMS with TROXNETCOM or with interface modules such as those in SLC® technology
  • Cmod for smoke extraction with ventilation function and control characteristics in combined systems (combination damper) and therefore pneumatic balancing possible via travel to intermediate positions

read more

layer

EK2-EU


Rectangular smoke control dampers with ventilation function for heat and smoke exhaust with mechanical smoke extract systems, for the provision of additional supply air and for use in pressure differential systems

  • CE-compliant smoke control damper according to EN 12101-8
  • Meets the maximum possible performance characteristics for smoke control dampers according to classification standard EN 13501-4
  • Use in load-bearing structures (solid and lightweight partition walls and ceiling slabs) to ensure fire integrity (fire compartmentation)
  • For the ducts and shafts of heat and smoke exhaust systems.
  • For pressure differential systems, mechanical smoke extract systems, gas extinguishing systems and for providing additional supply air
  • Control input signal from the fire alarm system and integration into the central BMS with TROXNETCOM
  • Remote signalling with open/close actuator and end position feedback
  • Cmod = for smoke extract and ventilation in combined systems, which allows for pneumatic volume flow rate balancing as the damper blade can take intermediate positions
  • Nominal sizes 200 × 200 – 1500 × 800 mm, for smoke gas flow rates up to 43200 m³/h or 12000 l/s at 10 m/s
  • Low pressure losses with high upstream velocities, standard value of 10 m/s and above
  • Automatic release (AA), option of manual override (MA)
  • Simple and quick dry mortarless installation in solid and lightweight partition walls possible

read more

EK-JZ SMOKE CONTROL DAMPER: UNIVERSAL. MODULAR. SAFE. 

Smoke control dampers with the largest possible openings are required to keep escape and rescue routes smoke-free.

This is the only way to achieve large volume flow rates at low airflow velocities – a prerequisite for the effective functioning of pressure differential systems (DBA).

Go to EK-JZ product page: configure and order online

► All benefits can be found in the brochure (PDF) ►►

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34