Type FKR-EU

For large diameters, with or without a flange

Large circular fire damper for the isolation of duct penetrations between fire compartments, available in nine nominal sizes

  • Nominal sizes: 315 – 800 mm
  • For mortar-based installation in solid walls, ceiling slabs and lightweight partition walls
  • Dry mortarless installation into lightweight partition walls
  • Low differential pressure and sound power level
  • Flanges as an option
  • Explosion-proof construction (ATEX) as an option
  • Optional stainless steel casing or powder-coated casing for increased corrosion protection
  • Integration into the central BMS with TROXNETCOM


Optional equipment and accessories

  • Electric actuator 24 V/230 V
  • Release temperature 72/95 °C
  • Duct smoke detectors

Fire damper Type FKR-EU 00137501_0
  • Application
  • Description

Application

  • Fire dampers of Type FKR-EU, with CE marking and declaration of performance, for the isolation of duct penetrations between fire compartments in the event of a fire
  • To prevent the propagation of fire and smoke through ductwork to adjacent designated fire compartments

Special characteristics

  • Declaration of performance according to Construction Products Regulation
  • Classification to EN 13501-3, up to EI 120 (ve, ho, i ↔ o) S
  • Building inspectorate licence Z-56.4212-991 for fire resistance properties
  • Complies with the requirements of EN 15650
  • Tested to EN 1366-2 for fire resistance properties
  • Hygiene complies with VDI 6022 part 1 (07/2011), VDI 3803 (10/2002), DIN 1946 part 4 (12/2008), and EN 13779 (09/2007)
  • Corrosion protection according to EN 15650 in connection with EN 60068-2-52
  • Closed blade air leakage to EN 1751, class 4
  • Casing air leakage to EN 1751, class C
  • Low differential pressure and sound power level
  • Any airflow direction
  • Integration into the central BMS with TROXNETCOM
  • Explosion-proof constructions for zones 1, 2, 21, 22

Classification

  • Class of performance to EN 13501-3, up to EI 120 (ve, ho, i ↔ o) S

Nominal sizes

  • 315, 355, 400, 450, 500, 560, 630, 710, 800
  • L: 495 mm or 550 mm (depending on casing construction)

Variants

  • With fusible link
  • With fusible link for use in potentially explosive atmospheres
  • With spring return actuator
  • With spring return actuator for use in potentially explosive atmospheres

Parts and characteristics

  • Release temperature 72 °C or 95 °C (for use in warm air ventilation systems)
  • Single-handed operation

Attachments

  • Limit switch for damper blade position indication
  • Limit switch for damper blade position indication for use in potentially explosive atmospheres
  • Spring return actuator for 24 V AC/DC or 230 V AC supply voltage
  • Spring return actuator for 24 – 230 V supply voltage, for use in potentially explosive atmospheres
  • Network module for the integration with AS-i or LON networks

Accessories

  • Flexible connectors
  • Cover grille
  • Extension piece
  • Installation kit TQ

Useful additions

  • Duct smoke detector RM-O-3-D
  • Duct smoke detector with airflow monitor RM-O-VS-D

Construction features

  • Rigid, circular casing with spigot connections suitable for circular ducts. Spigots with lip seal on both ends, suitable for commercially available circular ducts to EN 1506 or EN 13180; alternatively with flanges on both ends. Flanges, to EN 12220
  • The release mechanism is accessible and can be tested from the outside
  • Suitable for the connection of ducts, flexible connectors or a cover grille
  • Remote control with spring return actuator

Materials and surfaces

Casing:

  • Galvanised sheet steel
  • Galvanised sheet steel, powder-coated RAL 7001
  • Stainless steel 1.4301


Damper blade:

  • Special insulation material
  • Special insulation material with coating


Other components:

  • Damper blade shaft in stainless steel
  • Plastic bearings
  • Seals of elastomer


The construction variants with stainless steel or powder-coated casing meet even more critical requirements for corrosion protection. Detailed listing on request.

Standards and guidelines

  • Construction Products Regulation
  • EN 15650:2010 Ventilation for buildings – Fire dampers
  • EN 1366-2:1999 Fire resistance tests for service installations – Fire dampers
  • EN 13501-3:2010 Fire classification of construction products and building elements
  • EN 1751:1999 Ventilation for buildings – Air terminal devices

Maintenance

  • The functional reliability of the fire damper must be tested at least every six months; this has to be arranged by the owner of the ventilation system; functional tests must be carried out in compliance with the basic maintenance principles stated in EN 13306 and DIN 31051. If two consecutive tests, one 6 months after the other, are successful, the next test can be conducted one year later
  • A functional test involves closing the damper blade and opening it again; with a spring return actuator this can be done via remote control
  • Fire dampers must be included in the regular cleaning schedule of the ventilation system.
  • For details on maintenance and inspection refer to the installation and operating manual

References

Kaiser Franz Josef hospital

  • Information about the Building
Project: Kaiser Franz Josef hospital, Vienna
Application: Hospitals
Location: Vienna, Austria
Building type: new building
Year of completion: 03.2016
 
 
 


Construction company:
 Arbeitsgemeinschaft Projektmanagement SZX Teilneubau KFJ VSG-VKMB
Architect: Nickl & Partner
Designer: FEG Freudensprung
 
Total air volume: 181.000 m³/h
 



TROX-Products
  • Air diffusers: VSD, VDW, SL, HESCO LDD
  • Control units: TVR, TVJ
  • Sound attenuators: MKA, MSA, XKA, CF, CS
  • Fire and Smoke Protection: FK-EU, FKRS-EU
  • External louvres: JZ
 

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34