Central air handling units

layer

X-CUBE X2

The X-CUBE CROFCU is a compact ventilation unit that ensures and maintains the essential conditions for all classes of clean rooms. The secondary unit for use with centralised ventilation and air conditioning systems is typically installed in false ceilings. It dissipates high thermal loads and requires only a low fresh air volume flow. The primary air system (patent pending) allows for the direct removal of exhaust air while fresh air is supplied to the room.

  • Suitable for all clean room concepts
  • Pumped chilled water cooling system with room temperature control
  • Increased flexibility if several units are connected
  • Energy-efficient plug fan with EC motor
  • Addition of fresh air from 50 m3/h to 2000 m3/h
  • Monitoring of filters downstream
  • Control of airlocks for people and material
  • Contamination check by means of pressure zone control
  • Space-saving due to smaller ducts
  • Simple and quick commissioning due to plug and play

read more

layer

X-CUBE

With the TROX X-CUBE, an air handling unit with unlimited configuration options, TROX sets a new standard in the AHU market and defines considerably higher levels of quality, performance, flexibility, reliability, energy efficiency, and hygiene. Compelling all down the line. TROX now offers everything from a single source: air handling units and components – ideally complementary to each other.
For even more energy efficiency and better quality with less coordination effort.

  • For the ventilation of rooms and entire buildings, for filtering, heating, and cooling the air, for heat recovery as well as for humidification and dehumidification, and for volume flow rates of up to 86,000 m³/h
  • Flexible frame construction, completely covered externally by thermally insulated panels or doors
  • Easy installation, maintenance and cleaning
  • Significantly reduced wiring workload due to flexible control and regulation based on fieldbus technology.
  • Special hygiene construction variant according to AHU Guideline 01 (RLT-Richtlinie 01) for use in hospitals and laboratories; weatherproof construction variant for outdoor installation

Your X-CUBE Kontakt:

Sales Austria and technical consulting

Phone +43 1 250 43-0
Fax      +43 1 250 43-34
E-Mail trox@trox.at

read more

layer

X-CUBE compact

The X-CUBE compact distinguishes itself by high quality in each and every detail
and a whole spectrum of intelligent advantages

With the X-CUBE compact TROX has created a ready-to-operate and pre-configured air handling unit that combines the excellent features of the X-CUBE in the smallest of spaces. These units handle volume flow rates of 600 to 6,000 m³/h and offer a heat recovery efficiency of over 80 % (dry, to EN 308), hence they are the ideal solution for small and midrange applications.

Energy-efficient plug fans with EC motor ensure maximum efficiency and low sound power levels.
An extensive range of accessories, such as a heating coil, a CO2 sensor and a room control panel,
can easily be connected to the X-CUBE control system.

Advantages at a glance

  • Volume flow rates of 600 to 6,000 m³/h
  • Maximum energy efficiency
  • Powerful EC fans
  • High level of hygiene (conforms to VDI 6022)
  • Heat recovery with rotary heat exchanger or counter flow plate heat exchanger
  • Air filtration with TROX minipleat or NanoWave filters
  • Ready-to-operate unit (plug and play)
  • Integral, bus compatible controls
  • Intuitive operation
  • Integration with advanced ventilation and air conditioning systems
  • Optional weatherproof version with powder-coated metal roof to protect the unit and accessories,
    with perimeter drip edge, RAL 7012
  • Made in Germany

read more

layer

X-CUBE Ex

In certain locations or with certain conditions, even air can present a hazard. If flammable gases, mists or vapours, or combustible dusts mix under atmospheric conditions with air, an explosive atmosphere may result. In such a case it needs only a source of ignition, e.g a spark, friction, heat or electrostatic discharge, to cause an explosion, which in turn can result in loss of life, serious injuries and significant damage.

It is hence essential that equipment and systems intended for use in areas with potentially explosive atmospheres are designed and installed in such a way that the health and safety of people are not at risk.

Air handling units which are to be installed in areas with potentially explosive atmospheres, or which circulate potentially explosive air, have to meet special requirements; system owners, specialist consultants, HVAC contractors and manufacturers all have to ensure that these requirements are met.

The legally binding measures required to avoid hazards and to improve safety for people at risk from explosive atmospheres are stipulated in Directive 1999/92/EC (ATEX 137) for system owners and in Directive 2014/34/EU for manufacturers

read more

X-CUBE X2 compact

read more

layer

X-CUBE CROFCU

The X-CUBE CROFCU is a compact ventilation unit that ensures and maintains the essential conditions for all classes of clean rooms. The secondary unit for use with centralised ventilation and air conditioning systems is typically installed in false ceilings. It dissipates high thermal loads and requires only a low fresh air volume flow. The primary air system (patent pending) allows for the direct removal of exhaust air while fresh air is supplied to the room.

  • Suitable for all clean room concepts
  • Pumped chilled water cooling system with room temperature control
  • Increased flexibility if several units are connected
  • Energy-efficient plug fan with EC motor
  • Addition of fresh air from 50 m3/h to 2000 m3/h
  • Monitoring of filters downstream
  • Control of airlocks for people and material
  • Contamination check by means of pressure zone control
  • Space-saving due to smaller ducts
  • Simple and quick commissioning due to plug and play

read more

TROX X-CUBE X2

THE NEW SERIES FROM THE TROX X-CUBE RANGE

The X-CUBE units from TROX set new benchmarks in terms of flexibility, hygiene, energy efficiency, ease of maintenance and connectivity.


X-CUBE X2 is a newly developed series from TROX, designed specifically to extend the X-CUBE range. The new generation is optimised for small to medium volume flow rates and offers tried-and-tested TROX system quality with sophisticated details.

Here are the highlights.

AHU ONLINE CONFIGURATOR

No expert knowledge required:

No expert knowledge required:

  • Configure TROX X-CUBE units

  • Calculate energy and other consumption values

  • Calculate life cycle costs 

Go to AHU online configurator

From good to better

Reduce energy costs with the X-CUBE downstream sound attenuator

Sound attenuators improve, obviously, the acoustics; but they can also help to reduce energy costs, as is proven by the new TROX downstream sound attenuator for the X-CUBE AHU. 

It is placed just downstream of the fan and, due to the clever air distribution, creates a much lower pressure drop while at the same time reducing the sound power level.

  • Patented new product
  • Ideal for air volumes up to 9,000 m³
  • Optimised performance, improved downstream characteristics
  • Lower noise emission levels
  • Increased energy efficiency

For efficient heat recovery

The Ecodesign Directive prescribes that from 2018 onwards, air handling units must offer a heat recovery efficiency of more than 73%, and RAC systems more than 68%. A run around coil system from TROX with a TROX hydraulic unit including special RAC control guarantees highly efficient heat recovery of up to 80 %.

Furthermore: A special highlight is the reliable technical data by a certified design software.

The perfect overall system:

  • Optimum control
  • High operational reliability
  • State-of-the-art technology
  • Economic efficiency


Suitable for all requirements:

  • Optional cold and heat feed
  • Dehumidification recovery
  • Preheating/filter
  • Indirect adiabatic cooling


Find out more in our brochure "X-CUBE Run around coil system for efficient heat recovery".

Download Brochure (PDF)

X-CUBE control - the film 

Advanced ventilation systems by example of a hospital

Hygiene and safety are complex challenges that only complete ventilation and air conditioning systems with intelligent control functions can meet. 

X-CUBE control is THE intelligent solution. How? Look here!


X-CUBE Production in Germany. Action!

Engineering. People. Quality. Three words that summarize the essence of our X-CUBE production in Anholt, Germany. Watch our video and discover it for yourself.

You can watch the production of the X-CUBEs - in unusual perspectives, aesthetic details and fast cuts.

ACTION!

TROX automatically checks energy efficiency according to ecodesign directive

With the adoption of the Kyoto Protocol, the European Union has committed itself to reducing CO2 emissions by at least 20 percent by 2020. In order to reach this goal, the EU adopted already in 2005 the Energy-Using Products Directive. The Energy-Related Products Directive 2009/125/EG, colloquially called 'ecodesign directive', defines minimum requirements for many energy-related products. Within the European Union, air handling units have to meet new energy efficiency requirements from 1 January 2016 onwards. The next step after that will become effective two years later, on 1 January 2018.

TROX air handling units of Type X-CUBE are configured to individual customer requirements with a dedicated configuration software. This software automatically considers the new energy efficiency requirements for all X-CUBE air handling units and hence ensures their correct configuration. All X-CUBE air handling units that are produced and placed on markets of the European Union from 1 January 2016 onwards meet the new requirements.

Please find attached the table ErP – Efficiency Requirements as of 2016

ErP – Efficiency Requirements as of 2016

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34