Air grilles

Product Finder

layer

ASL

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 23 – 2000 l/s or 83 – 7200 m³/h
  • Grille face made of aluminium with anodised finish
  • Diffuser-type front border, 28 mm wide
  • Concealed screw fixing


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe
  • Attachments for volume flow rate balancing and air direction control
  • Spring clip fixing

read more

layer

AWT

Ventilation grille with special profiled blades (rectangular cross section)

  • Nominal sizes 325 × 125 – 1225 × 325 mm
  • Volume flow rate range 17 – 950 l/s or 61 – 3420 m³/h
  • Grille face made of aluminium with anodised finish
  • Tested for installation in gymnasiums
  • Front border with countersunk holes, 30 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe

read more

layer

TRSR

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 75 – 1225 × 225 mm
  • Volume flow rate range 11 – 930 l/s or 40 – 3348 m³/h
  • Grille face made of galvanised sheet steel
  • Front border with countersunk holes, 27 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Attachments for volume flow rate balancing and air direction control

read more

layer

TRS

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 75 – 1225 × 325 mm
  • Volume flow rate range 11 – 1305 l/s or 40 – 4698 m³/h
  • Grille face made of sheet steel, powder-coated
  • Front border with countersunk holes, 27 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Grille face made of galvanised sheet steel, without powder coating
  • Installation subframe
  • Installation subframe for fitting filter media
  • Attachments for volume flow rate balancing and air direction control
  • Concealed screw fixing

read more

layer

Type KS (Plastic Grilles)

Type KS grilles suitable for supply and extract use. 
The grille has an injection moulded border with holes for site fixing with suitable screws.

Type KS-A with horizontal face blades which are individually adjustable.

read more

layer

SL

Single ventilation grilles and horizontal run sections with droplet shaped blades

  • Nominal sizes 225 × 125 – 1225 × 525 mm and horizontal run sections
  • Volume flow rate range 23 – 2000 l/s or 83 – 7200 m³/h
  • Grille face made of sheet steel, powder-coated
  • Diffuser-type front border, 28 mm wide longitudinal section, 20 mm wide transverse section
  • Concealed screw fixing


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Installation subframe
  • Installation subframe for fitting filter media
  • Attachments for volume flow rate balancing and air direction control

read more

layer

TR

Ventilation grille with droplet shaped blades

  • Nominal sizes 225 × 125 – 1225 × 525 mm
  • Volume flow rate range 23 – 2000 l/s or 83 – 7200 m³/h
  • Grille face made of sheet steel, powder-coated
  • Front border with countersunk holes, 27 mm wide


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Grille face made of galvanised sheet steel, without powder coating
  • Installation subframe
  • Installation subframe for fitting filter media
  • Attachments for volume flow rate balancing and air direction control
  • Concealed screw fixing

read more

layer

AF

Single ventilation grilles and horizontal run sections with special profiled blades

  • Nominal sizes 225 × 75 – 1225 × 425 mm and horizontal run sections
  • Volume flow rate range 10 – 1235 l/s or 36 – 4446 m³/h
  • Grille face made of aluminium with anodised finish
  • Front border suitable for floor installation without an installation subframe
  • Removable grille core with special spring clip fixing


Optional equipment and accessories

  • Grille face in RAL CLASSIC colours
  • Attachments for volume flow rate balancing and air direction control

read more

Please select your disired product properties:
Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades and diffuser-type front border Type ASL

ASL

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades and diffuser-type front border

read more

Ball impact resistant ventilation grille made of aluminium, with fixed horizontal blades Type AWT

AWT

Ball impact resistant ventilation grille made of aluminium, with fixed horizontal blades

read more

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into circular ducts Type TRS-R (circular duct installation)

TRSR

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into circular ducts

read more

Ventilation grilles, made of sheet steel, with individually adjustable, vertical blades Type TRS

TRS

Ventilation grilles, made of sheet steel, with individually adjustable, vertical blades

read more

Type KS

Type KS (Plastic Grilles)

read more

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades and diffuser-type front border – also for horizontal runs Type SL

SL

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades and diffuser-type front border – also for horizontal runs

read more

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades Type TR

TR

Ventilation grilles, made of sheet steel, with individually adjustable, horizontal blades

read more

Ventilation grilles, made of aluminium, with fixed longitudinal blades, for floor installation – also for horizontal runs Type AF

AF

Ventilation grilles, made of aluminium, with fixed longitudinal blades, for floor installation – also for horizontal runs

read more

Damper units, made of dip coated sheet steel, for installation into rectangular ducts Type AGW

AGW

Damper units, made of dip coated sheet steel, for installation into rectangular ducts

read more

Ventilation grilles with flat border construction – also for continuous horizontal runs Type X-GRILLE Basic

X-GRILLE-Basic

Ventilation grilles with flat border construction – also for continuous horizontal runs

read more

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into rectangular ducts Type TRS-K (duct installation)

TRSK

Ventilation grilles, made of galvanised sheet steel, with individually adjustable, vertical blades, for installation into rectangular ducts

read more

Ventilation grilles, made of high-quality aluminium – also for continuous horizontal runs Type X-GRILLE Cover

X-GRILLE Cover

Ventilation grilles, made of high-quality aluminium – also for continuous horizontal runs

read more

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades Type AT

AT

Ventilation grilles, made of aluminium, with individually adjustable, horizontal blades

read more

Damper units, made of dip coated sheet steel, with air control blades, for installation into rectangular ducts Type DGW

DGW

Damper units, made of dip coated sheet steel, with air control blades, for installation into rectangular ducts

read more

Hit and miss dampers, made of sheet steel, for installation into rectangular ducts Type ASW

ASW

Hit and miss dampers, made of sheet steel, for installation into rectangular ducts

read more

Non-vision air transfer grilles, made of aluminium, with fixed horizontal blades Type AGS

AGS

Non-vision air transfer grilles, made of aluminium, with fixed horizontal blades

read more

Ventilation grilles, made of aluminium, with fixed horizontal blades – also for horizontal runs Type AH

AH

Ventilation grilles, made of aluminium, with fixed horizontal blades – also for horizontal runs

read more

Ventilation grilles, made of aluminium, with individually adjustable, vertical blades Type VAT

VAT

Ventilation grilles, made of aluminium, with individually adjustable, vertical blades

read more

Grille cores made of aluminium, with fixed horizontal blades Type EF · EFG

EF

Grille cores made of aluminium, with fixed horizontal blades

read more

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34