Demand-based room control with X-AIRCONTROL

Product selection A-Z
Productname
layer

FAM - RadioDuct

  • Patented TROX radio transmission through the ventilation duct

  • Wireless data connection of the X-AIRCONTROL zone modules and zone masters up to the air handling unit

  • Wireless mesh radio system with frequency hopping

  • Plug-and-play connection of the X-AIRCONTROL modules to the RadioDuct ventilation duct radio system

  • With integrated repeater function for range extension

  • Automatic routing of data via the RadioDuct radio systems available in the system

  • Virtually interference-free use due to shielding against external interference and emitted radio radiation

  • Continuous radio link without interference (walls, concrete ceilings) from rooms to the air handling unit

 


Optional equipment and accessories:

  • PC software: configuration software for the commissioning and diagnosis of the RadioDuct module

  • RJ12 connection cable for easy plug and play

 

read more

layer

X-AIR-CP

Control panels for adapting the room temperature setpoint and for measuring the room temperature

  • Integral room temperature sensor
  • Easy configuration of zone modules for stand-alone solutions


Optional equipment and accessories

  • Setpoint value adjuster: For adjusting the room temperatur setpoint by ±5 K
  • Colour touch screen: Display of actual values and setpoint values, date and time, operating mode default and room temperature setpoint; integral real-time clock for defining simple schedules

read more

layer

X-AIR-ZMO

X-AIRCONTROL zone modules for single room control, with interfaces to a control panel and to a zone master module

  • Single room control system for the demand-based control of temperature, air quality and humidity, and for detecting room occupancy
  • Connection of a room temperature sensor, motion detector, VOC or CO2 sensor as well as of a window contact, frost protection sensor or dew point sensor
  • Connection of air terminal units for supply air and extract air
  • Connection of a heating valve and a cooling valve
  • Connection of a room control panel
  • Single room control system can be expanded by centralised functions if a zone master is used


Optional equipment and accessories

  • VAV terminal units for supply and extract air
  • Valves with actuator for heating and cooling
  • Control panels with setpoint value adjuster or touch screen
  • Sensors

read more

layer

X-AIR-ZMAS

X-AIRCONTROL zone master module for the control of zone modules and as an interface to higher-level systems such as air handling units and central BMS

  • Optimisation of control functions to achieve a comfortable and energy-efficient operation of ventilation and air conditioning systems
  • One zone master module and up to 25 zone modules form a segment
  • Up to five cascading master modules form a section with up to 125 zone modules
  • Communication between master modules, and between master and zone modules, is by plug and play
  • Web server for configuration and operation; user interface optimised also for mobile devices
  • Modbus TCP and BACnet IP interfaces to higher-level systems such as the central BMS
  • Modbus RTU interface to air handling units Type X-CUBE compact
  • Connection of signals, e.g. outdoor air temperature and fire alarm
  • Output of signals, e.g. requests and alarms

read more

layer

X-SENS

Components for measuring and recording various measured variables and conditions in systems for single room control and centralised control – such as X-AIRCONTROL

  • Combined temperature and humidity sensor
  • Dew point monitor
  • Air quality sensor
  • Presence detector (PIR sensor)
  • Splitter

read more

X-AIRCONTROL for rooms and zones

Efficient room control with X-AIRCONTROL

Increasingly demanding requirements on energy efficiency as well as the latest EU regulations have created a need for intelligent control engineering solutions in room air conditioning.
TROX has combined its know-how from all divisions of air distribution technology and developed an energy-efficient overall system. The integration of the X-CUBE air handling unit, volume flow controllers, heating and cooling components, and air-water systems into an overall system offers huge economic and ecological benefits. The very flexible system for the control of single rooms or of several rooms can also be used independently, i.e. without an air handling unit or centralised ventilation unit.

ADVANTAGES

  • Individual room control
  • Optimisation of the air handling unit based on ventilation and air conditioning parameters
    - Fan speed control based on the damper blade position of VAV terminal units
    - Control of the recirculation damper based on the air quality
    - Centralised air conditioning (heating/cooling) based on actual room temperatures
  • Centralised alarm management and display of actual operating values
  • Cost optimisation due to reduced number of data points
  • Easy commissioning

Flyer: X-AIRCONTROL

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34