Smoke Control Damper

layer

EK-EU

Rectangular smoke control dampers with extract ventilation function, for smoke extract with mechanical smoke extract systems or as an additional supply air inlet

  • Nominal sizes 200 × 200 – 1500 × 800 mm, in increments of 1 mm
  • Casing, damper blade and actuator encasing made of temperature-resistant calcium silicate
  • Remote control with actuator
  • Pressure level 3 (operating pressure –1500 to 500 Pa)
  • Manual or automatic release
  • For smoke extract ducts from 35 mm wall thickness
  • Energy efficient due to low differential pressures and sound power levels
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Connecting subframe
  • Cover grille
  • Inspection access panels
  • Integration into the central BMS with TROXNETCOM
  • Cmod = ventilation function and intermediate positions for flow rate balancing with TROXNETCOM

read more

layer

EK-JZ

Rectangular smoke control dampers with ventilation function, low installation depth and large cross section for heat and smoke exhaust with mechanical smoke extract systems, for the provision of additional supply air and for use in pressurisation systems

  • Nominal sizes 200 × 430 – 1200 × 2030 mm, for smoke gas flow rates of up to 87,700 m³/h or 24,360 l/s at 10 m/s
  • Quick and easy installation in or on building structures, for smoke and heat exhaust, remote control with an actuator
  • Casing, damper blades and actuator encasing made of temperature-resistant calcium silicate
  • Pressure level 2 (operating pressure –1000 to 500 Pa)
  • Automatic release (AA), option of manual override (MA)
  • For smoke extract ducts from 35 mm wall thickness
  • C10,000 = for combined smoke extract and ventilation systems
  • Closed blade air leakage to EN 1751, class 3
  • Casing air leakage to EN 1751, class C


Optional equipment and accessories

  • Cover grille (various constructions)
  • Connecting subframe for calcium silicate and sheet steel smoke extract ducts
  • Integration into the central BMS with TROXNETCOM

read more

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.


Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Visual contact Visual contact

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Visual contact Visual contact

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34