00135585_0
Expansion module EM-AUTOZERO


00135585_0
00133217_0

EM-AUTOZERO

AUTOMATIC ZERO POINT ADJUSTMENT FOR TROX UNIVERSAL AND EASYLAB CONTROLLERS

Extension module for long-term stable volume flow measurement with reduced maintenance effort

  • Especially recommended for volume flow measurement and control in critical areas
  • Automatic recognition and use by the controller
  • Expansion module is integrated into the housing of the EASYLAB or TROX UNIVERSAL controller
  • Easy retrofitting
  • No additional configuration effort

General information

Application

  • Extension module for EASYLAB and TROX UNIVERSAL controllers based on the TCU3 controller board
  • EM-AUTOZERO, automatic zero point correction for longterm stable volume flow rate measurement and reduced maintenance.
  • Annua zero point adjustment manually not required


  • Suitable for factory or retrofit installation Areas of application:
  • For EASYLAB fume cupboard controllers
  • For EASYLAB supply air, exhaust air or pressure regulators
  • For TROX UNIVERSAL supply air or exhaust air controllers
  • For TROX UNIVERSAL pressure regulators with integrated flow rate measurement (requires additional EM-V extension module)


  • In areas with high requirements for measuring and controlling the volume flow, e.g. in laboratories, clean rooms for pharmaceuticals and semiconductor production, operating theatres, intensive care units as well as offices


Special features

  • Long-term stable volume flow rate measurement and reduced maintenance
  • Automatic zero point correction as soon as the supply voltage is applied
  • Cyclic zero point adjustment during operation (every 8 h)
  • No additional configuration effort
  • Expansion module is automatically recognised by the EASYLAB and TROX UNIVERSAL controller


Parts and characteristics

  • Solenoid valve
  • Connection cable with two-pin plug for connection to the TCU3 controller board
  • Tubes for the connection of the static differential pressure transducer


Construction features

  • Dimensions and fixing suitable for EASYLAB and TROX UNIVERSAL controller casing
  • The expansion module is inserted into a recess of the holder for the differential pressure transducer (no tools required)
  • Can be integrated into existing tubing of the differential pressure sensor (connection with static differential pressure transmitter)
  • Plug for easy connection to the controller board TCU3


Commissioning

  • When ordering an air terminal unit with EASYLAB or TROX UNIVERSAL controller - specifying order option Z: EMAUTOZERO installed, connected and ready for operation
  • For retrofitting: installation and connection required; module is then automatically recognised and zero point adjustment is supported

Technical information

Function, Technical data, Specification text, Order code, Related products

  • Function
  • TECHNICAL DATA
  • SPECIFICATION TEXT
  • ORDER CODE
EM-AUTOZERO 00133875_0
① Solenoid valve
② Plug
③ Differential pressure sensor – plus connection
④ Differential pressure sensor – minus connection
⑤ Pressure transducer – minus connection
⑥ Pressure transducer – plus connection


The solenoid valve of the EM-AUTOZERO extension module is integrated into the tubing of the static differential pressure transmitter and connected to the differential pressure sensor of the air terminal unit. EASYLAB and TROX UNIVERSAL controllers provide a zero point adjustment at regular intervals. For this purpose, the measuring tubes of the differential pressure transducer are temporarily short circuited, then the zero voltage is measured. This measured value is used as a correction value for the volume flow rate measurement until the next zero point correction.

Installation details

  • Installation details

Commissioning with factory preparation

When ordering the EASYLAB or TROX UNIVERSAL controller with EM-AUTOZERO expansion module, the module is installed at the factory, connected and immediately ready for operation.

Installation and commissioning for retrofitting

  • Disconnect the EASYLAB or TROX UNIVERSAL controller from the power supply
  • Install the EM-AUTOZERO expansion module and plug the connection cable into the TCU3 controller board
  • Extension module is automatically recognised at the next switch-on and the zero point adjustment is carried out


Special requirements for TROX UNIVERSAL pressure regulators:

  • EM-AUTOZERO extension module can only be used in combination with the EM-V extension module for simultaneous volume flow recording with pressure control



Downloads

product information

  • Product data sheet Type EM-AUTOZERO

    EM-AUTOZERO_PD_2023_02_16_DE_en Product data sheet 330 KB pdf

certificates

  • Declaration of conformity or declaration of incorporation EM-AUTOZERO

    Declaration of conformity or declaration of incorporation 26 KB pdf

  • Konformitätserklärung / Declaration of conformity EM-AUTOZERO

    CE_TCU3_rev2_DE_de_en_fr Certificate 26 KB pdf

operation manuals

  • Installation and operating manual Type EM-AUTOZERO

    Installation and operating manual 950 KB pdf
production {"x-frame-options"=>"SAMEORIGIN", "x-xss-protection"=>"1; mode=block", "x-content-type-options"=>"nosniff", "x-download-options"=>"noopen", "x-permitted-cross-domain-policies"=>"none", "referrer-policy"=>"strict-origin-when-cross-origin", "strict-transport-security"=>"max-age=31536000; includeSubDomains", "content-type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)
Your message
Your message to

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

TROX Logo
By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.
Cookie settings