Application
Parts and characteristics
Functional description
The actuator moves a damper blade or a damper blade mechanism to the minimum or maximum position.
Minimum and maximum positions can be set on potentiometers or using mechanical stops.
1-wire control or 2-wire control (3-point) can be used.
1-wire control is actually an open/close control or min/max control.
Control options and effect of actuator action in case of factory setting
B50, B52 | Min/Max | 1-wire control, 2-wire control | Vmin | Vmax |
B60, B62 | Min/Max | 1-wire control, 2-wire control | Vmin | Vmax |
E01 | Min/Max | 1-wire control, 2-wire control | Vmin | Vmax |
E02 | Min/Max | 1-wire control, 2-wire control | Vmin | Vmax |
M01 | Min/Max | 1-wire control, 2-wire control | Vmax | Vmin |
M02 | Min/Max | 1-wire control, 2-wire control | Vmax | Vmin |
Actuators LM24A and LM24A-F
Supply voltage (AC) | 24 V AC ± 20 %, 50/60 Hz |
Supply voltage (DC) | 24 V DC ± 20 % |
Power consumption – load | 1 W |
Power consumption – idle | 0.2 W |
Power rating | 1.5 VA |
Torque | 5 Nm |
Running time for 90° | 150 s |
Control input signal | 1-wire control or 2-wire control (3-point) |
Connecting cable | 3 × 0.75 mm², 1 m long |
IEC protection class | III (protective extra-low voltage) |
Protection level | IP 54 |
EC conformity | EMC to 2014/30/EU, RoHS to 2011/65/EU |
Operating temperature | –30 to 50 °C |
Weight | 0.5 kg |
Actuator LM230A and LM230A-F
Supply voltage | 100 – 240 V AC –15 % +10 %, 50/60 Hz |
Power consumption – load | 1.5 W |
Power consumption – idle | 0.5 W |
Power rating | 3.5 VA |
Torque | 5 Nm |
Running time for 90° | 150 s |
Control input signal | 1-wire control or 2-wire control (3-point) |
Connecting cable | 3 × 0.75 mm², 1 m long |
IEC protection class | II (protective insulation) |
Protection level | IP 54 |
EC conformity | EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU |
Operating temperature | –30 to 50 °C |
Weight | 0.5 kg |
Auxiliary switch S2A
Type of contact | 2 changeover contacts1) |
Max. switching voltage (AC) | 250 V AC |
Max. switching current (AC) | 3 A (resistive load); 0.5 A (inductive load) |
Max. switching voltage (DC) | 110 V DC |
Max. switching current (DC) | 0.5 A (resistive load); 0.2 A (inductive load) |
Connecting cable | 6 × 0.75 mm², 1 m long |
IEC protection class | II (protective insulation) |
Protection level | IP 54 |
EC conformity | EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU |
Operating temperature | –30 to 50 °C |
Weight | 0.250 kg |
1) If both auxiliary switches are used the switching voltages must be the same
Actuator 224-24-03-001
Supply voltage (AC) | 24 V AC ± 20 %, 50/60 Hz |
Supply voltage (DC) | 24 V DC ± 20 % |
Power rating (AC) | 4.5 VA |
Power rating (DC) | 3 W |
Torque | 2.5 Nm |
Running time for 90° | 20 – 60 s |
Control input signal | 1-wire control or 2-wire control (3-point) |
Connecting cable | 3 × 0.75 mm², 1 m long |
IEC protection class | III (protective extra-low voltage) |
Protection level | IP 42 |
EC conformity | EMC to 2014/30/EU, RoHS to 2011/65/EU |
Operating temperature | 0 to 50 °C |
Weight | 0.32 kg |
Actuator CM24-F
Supply voltage (AC) | 24 V AC ± 20 %, 50/60 Hz |
Supply voltage (DC) | 24 V DC ± 20 % |
Power rating (AC) | 1 VA max. |
Power rating (DC) | 0.5 W max. |
Torque | 2 Nm |
Running time for 90° | 75 s |
Control input signal | 1-wire control or 2-wire control (3-point) |
Connecting cable | 3 × 0.75 mm², 1 m long |
IEC protection class | III (protective extra-low voltage) |
Protection level | IP 54 |
EC conformity | EMC to 2014/30/EU, RoHS to 2011/65/EU |
Operating temperature | –30 to 50 °C |
Weight | 0.185 kg |
Actuator 224-230-03-002
Supply voltage | 230 V AC, 50/60 Hz |
Power rating | 4.5 VA |
Torque | 2.5 Nm |
Running time for 90° | 20 – 60 s |
Control input signal | 1-wire control or 2-wire control (3-point) |
Connecting cable | 3 × 0.75 mm², 1 m long |
IEC protection class | II (protective insulation) |
Protection level | IP 42 |
EC conformity | EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU |
Operating temperature | 0 to 50 °C |
Weight | 0.32 kg |
Actuator CM230-F
Supply voltage | 100 to 240 V AC –15 % +10 %, 50/60 Hz |
Power rating | 3 VA |
Torque | 2 Nm |
Running time for 90° | 75 s |
Control input signal | 1-wire control or 2-wire control (3-point) |
Connecting cable | 3 × 0.75 mm², 1 m long |
IEC protection class | II (protective insulation) |
Protection level | IP 54 |
EC conformity | EMC to 2014/30/EU, low voltage to 2014/35/EU, RoHS to 2011/65/EU |
Operating temperature | –30 to 50 °C |
Weight | 0.185 kg |
Any attachments are to be defined with the order code of the CAV controller.
B5*
Application
Variants
Parts and characteristics
Commissioning
B6*
Application
Variants
Parts and characteristics
Commissioning
B*2
Application
E01
Application
Parts and characteristics
Commissioning
M01
Application
Parts and characteristics
Commissioning
E02
Application
Parts and characteristics
Commissioning
M02
Application
Parts and characteristics
Commissioning
Actuators for volume flow controllers Type RN or EN
B50 | M466DT4 | LM24A-F | 24 V | – | – |
B52 | M466DT4 | LM24A-F | 24 V | M536AI3 | S2A |
B60 | M466DT5 | LM230A-F | 230 V | – | – |
B62 | M466DT5 | LM230A-F | 230 V | M536AI3 | S2A |
Actuators for volume flow controllers Type VFC and for flow adjustment dampers Type VFR
E01 | A00000038358 | 224-024-03-001 | Potentiometer | 24 V |
M01 | M466EP4 | CM24-F | Mechanical stops | 24 V |
E02 | A00000038359 | 224-230-03-002 | Potentiometer | 230 V |
M02 | M466EP5 | CM230-F | Mechanical stops | 230 V |
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34
Contact
We are here for you
Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34