Smoke control dampers with the largest possible openings are required to keep escape and rescue routes smoke-free.
This is the only way to achieve large volume flow rates at low airflow velocities – a prerequisite for the effective functioning of pressure differential systems (DBA).
When you enter a building, you want to be sure it's safe. You don't want to worry about fire protection or smoke control.
And you need not worry with TROXNETCOM: The TROX overall control system for complex fire and smoke protection solutions.
With just ONE interface for ALL components!
See for yourself.
Every person should be able to feel safe in the knowledge that the building they are entering or using and underground transport systems will not put them in danger or become a trap. For this reason, fire can never really be completely ruled out, not least due to human error.
The correct preventative measures and components can help to eliminate this risk and restrict the damage caused by fire. Fire safety components and systems help to minimise the risk of fire and prevent fire and smoke from spreading.
TROX fire dampers carry the CE marking in compliance with EN 15650. The CE marking ensures that TROX fire dampers can be used for all approved applications across the EU.
With the TROX Declaration of Performance and the operating and installation manual customers are given a complete documentation package which ensures that TROX fire dampers can be used safely.
Since the Construction Products Regulation (CPR) became effective on 1 July 2013, Declarations of Performance have replaced the previously used approval certificates or declarations of conformity.
By providing the Declarations of Performance, TROX, as a manufacturer, ensures that its products conform to the data given in these documents.
Construction Products Regulation - New harmony for European markets
Während in der Vergangenheit die Öffnungen für den Einbau einer Brandschutzklappe in eine massive Wand oder Decke exakt und nur mit geringen Toleranzen geplant und ausgeführt wurden, können die Weichschott-Lösungen sehr viel flexibler gehandhabt werden. So wird die Montage in vorhandene Öffnungen möglich, die umlaufend um bis zu 400 mm größer sein können als die Gehäuseabmessung. Exakte Planungen der Einbauöffnungen sind damit nicht mehr zwingend erforderlich.
Weitere Vorteile sowie den gesamten Artikel finden Sie hier.
Share page
Recommend this page
Recommend this page by sending a link by mail.
Share page
Thank you for your recommendation!
Your recommendation has been sent and should arrive shortly.
Contact
We are here for you
Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34
Contact
We are here for you
Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34
Contact
Thank you for your message!
Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34