WG_img_16psd.png
External weather louvre, variant WG

External weather louvre made of galvanised steel sections

WG_img_02psd.png
Bottom blade

Bottom blade

WG_img_01psd.png
Regular blades

Regular blades

WG_img_16psd.png
WG_img_02psd.png
WG_img_01psd.png

WG     

External weather louvres for the protection of ventilation and air conditioning systems

External weather louvres to protect ventilation and air conditioning systems against the direct ingress of rain, leaves and birds into fresh air and exhaust air openings. In combination with insect screens, they also provide protection against insects. They are used for a wide variety of applications with regard to air flow and can also cover large installation openings. For single grilles, the following applies:

  • Maximum width of 2400 mm, maximum height of 2310 mm, maximum area of 4 m² (aluminium variant also as continuous horizontal runs)
  • Low differential pressure due to aerofoil blades
  • Low air-regenerated noise due to a rounded drip edge
  • Simple and quick installation due to perimeter border
  • Variants made of galvanised sheet steel, aluminium or stainless steel
  • Large-area arrangement of several single grilles in combination with support structure provided by others possible to cover very large installation openings  


Optional equipment and accessories

  • Installation subframe
  • Can be combined with multileaf or non-return dampers
  • Insect screen
  • Powder-coated or with anodised finish


General Information

Application

  • External weather louvres for fresh air and exhaust air openings of ventilation and air conditioning systems
  • Protection against the direct ingress of rain as well as against leaves and birds
  • Recommended face velocity for fresh air openings 2 – 2.5 m/s max.


Special features

  • Large areas possible by arranging multiple single sections horizontally and/or vertically (subdivided construction); single sections made of aluminium can also be combined into continuous horizontal runs
  • Low differential pressure and low air-regenerated noise due to aerofoil blades
  • Simple and quick installation due to perimeter border
  • Silicone free


Nominal sizes

  • B: 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 2200, 2400 mm (intermediate sizes 201 – 2399 mm in increments of 1 mm)
  • Width subdivided max. = 4900 mm (intermediate sizes 2401 – 4899 mm in increments of 1 mm)
  • H: 165, 330, 495, 660, 825, 990, 1155, 1320, 1485, 1650, 1815, 1980, 2145, 2310 mm (intermediate sizes 166 – 2309 mm in increments of 1 mm)
  • Height subdivided max. = 4720 mm (intermediate sizes 2311 – 4719 mm in increments of 1 mm)
  • Any combination of B × H
  • Undivided construction up to max. 4 m²


WG-B-AL

  • WG-B-AL-M (middle section) B: 2000 mm
  • WG-B-AL-E (end section) B: 1000 – 2000 mm (intermediate sizes 1001 – 1999 mm in increments of 1 mm)
  • H: 165 – 1980 mm (intermediate sizes 166 – 1979 mm in increments of 1 mm)


Variants

  • WG: External weather louvre made of galvanised sheet steel
  • WG-A2: External weather louvre made of stainless steel
  • WG-AL: External weather louvre made of aluminium
  • WG-B-AL: External weather louvre made of aluminium, for continuous horizontal runs


Construction

Cover grille

  • Crimped wire mesh, galvanised steel (only WG, WG-AL, WG-B-AL)
  • 1: With insect screen, galvanised steel (only WG, WG-AL, WG-B-AL)
  • 2: With crimped wire mesh, stainless steel (only WG-AL, WG-B-AL)
  • 3: With insect screen and crimped wire mesh, stainless steel (only WG-A2, WG-AL, WG-B-AL)


Front border

  • With holes
  • U: without holes



Parts and characteristics

  • Front border
  • Regular blades and bottom blade
  • Crimped wire mesh
  • Insect screen (optional)
  • Visible mullion or stabilising mullion at the rear, from B = 1385 mm


Accessories

  • Installation subframes for the fast and simple installation of external weather louvres


Construction features

  • Crimped wire mesh at the rear, mesh aperture 20 × 20 × 1.8 mm
  • Optional insect screen at the rear, mesh aperture 1.25 × 1.25 × 0.4 mm
  • Border fixing holes


Materials and surfaces

  • Border, mullion and blades made of formed galvanised sheet steel, aluminium or stainless steel
  • Crimped wire mesh made of galvanised steel or stainless steel
  • P1: Powder-coated, RAL CLASSIC colour
  • PS: Powder-coated, NCS or DB colour


Maintenance

  • Maintenance-free, as construction and materials are not subject to wear

Description

Variants

  • WG: External weather louvre made of galvanised sheet steel
  • WG-A2: External weather louvre made of stainless steel
  • WG-AL: External weather louvre made of aluminium
  • WG-B-AL: External weather louvre made of aluminium, for continuous horizontal runs


Parts and characteristics

  • Front border
  • Regular blades and bottom blade
  • Crimped wire mesh
  • Insect screen (optional)
  • Visible mullion or stabilising mullion at the rear, from B = 1385 mm


Accessories

  • Installation subframes for the fast and simple installation of external weather louvres




Nominal sizes

  • B: 200, 400, 600, 800, 1000, 1200, 1400, 1600, 1800, 2000, 2200, 2400 mm (intermediate sizes 201 – 2399 mm in increments of 1 mm)
  • Width subdivided max. = 4900 mm (intermediate sizes 2401 – 4899 mm in increments of 1 mm)
  • H: 165, 330, 495, 660, 825, 990, 1155, 1320, 1485, 1650, 1815, 1980, 2145, 2310 mm (intermediate sizes 166 – 2309 mm in increments of 1 mm)
  • Height subdivided max. = 4720 mm (intermediate sizes 2311 – 4719 mm in increments of 1 mm)
  • Any combination of B × H
  • Undivided construction up to max. 4 m²


WG-B-AL

  • WG-B-AL-M (middle section) B: 2000 mm
  • WG-B-AL-E (end section) B: 1000 – 2000 mm (intermediate sizes 1001 – 1999 mm in increments of 1 mm)
  • H: 165 – 1980 mm (intermediate sizes 166 – 1979 mm in increments of 1 mm)


Technical information

Function, Technical data, Quick sizing, Specification text, Order code, Related products

  • FUNCTION
  • TECHNICAL DATA
  • QUICK SIZING
  • SPECIFICATION TEXT
  • ORDER CODE

External weather louvres are externally mounted air transfer devices for the fresh air and exhaust air of air conditioning systems. They are installed in external walls and façades. Their narrowly arranged blades give good protection against the direct ingress of rain as well as against leaves and birds. Under certain unfavourable conditions, such as heavy rain, and depending on the airflow velocity, slight quantities of water could enter with the air. This is why the airflow velocity in fresh air openings should not exceed 2 – 2.5 m/s.

Nominal sizes200 × 165 – 2400 × 1650 / 1600 × 2310 mm
Width subdividedup to 4900 mm
Height subdivideup to 4720 mm
Horizontal runs (WG-B-AL)H: 165 – 1980 mm


 

Quick sizing tables in the Easy Product Finder provide a good overview of the


  • Possible volume flow rates for different airflow velocities
  • Corresponding pressure losses
  • Sound power level
  • Free areas

 


Precise values based on project-specific data can be determined with our Easy Product Finder design program.


You will find the Easy Product Finder on our website: 


www.trox.de/mytrox/auslegungsprogramm-easy-poduct-finder-182e16348fac3d33


Rectangular external weather louvre as a protection for air conditioning systems against the direct ingress of rain, leaves and birds into fresh air and exhaust air openings. Ready-to-install component which consists of a border, aerofoil rain defence blades, and a bird mesh at the rear.


Special features

  • Large areas possible by arranging multiple single sections horizontally and/or vertically (subdivided construction); single sections made of aluminium can also be combined into continuous horizontal runs
  • Low differential pressure and low air-regenerated noise due to aerofoil blades
  • Simple and quick installation due to perimeter border
  • Silicone free


Construction

Cover grille

  • Crimped wire mesh, galvanised steel (only WG, WG-AL, WG-B-AL)
  • 1: With insect screen, galvanised steel (only WG, WG-AL, WG-B-AL)
  • 2: With crimped wire mesh, stainless steel (only WG-AL, WG-B-AL)
  • 3: With insect screen and crimped wire mesh, stainless steel (only WG-A2, WG-AL, WG-B-AL)


Front border

  • With holes
  • U: without holes


Materials and surfaces

  • Border, mullion and blades made of formed galvanised sheet steel, aluminium or stainless steel
  • Crimped wire mesh made of galvanised steel or stainless steel
  • P1: Powder-coated, RAL CLASSIC colour
  • PS: Powder-coated, NCS or DB colour


Technical data

  • Nominal sizes: 200 × 165 – 2400 × 1650/1600 × 2310 mm
  • Width subdivided: up to 4900 mm
  • Height subdivided: up to 4720 mm
  • Continuous horizontal runs (WG-B-AL): height 165 – 1980 mm


Sizing data

  • qᵥ [m³/h]
  • Δpt [Pa]




Air-regenerated noise

  • LWA [dB(A)]



WGAL2/600 × 1155/ER/P1 - RAL …
|||||||
1234567
1 Type
WG External louvres
 
2 Material
No entry required: galvanised sheet steel
A2 Stainless steel
AL Aluminium
 
3 Construction
No entry required: crimped wire mesh
1 Insect screen, galvanised steel (only WG, WG-AL)
2 Crimped wire mesh, stainless steel (only WG-AL)
3 Crimped wire mesh and insect screen, stainless steel (only WG-AL, WG-A2)
 
4 Front frame
No entry required: with holes
U without holes
 
5 Nominal size [mm]
B × H
(B × H > 4 m2 when subdivided)
 
6 Installation subframe
No entry required: none
ER with (not with unperforated front frame)
 
7 Surface
No entry required: standard construction
P1 powder-coated, specify RAL CLASSIC colour
 
Only for WG-AL
S2 with anodised finish, specify EURAS standard colour (31 – 35)
S3 with anodised finish, E6-C-0, colour according to EURAS standard
 
Gloss level
RAL 9010 50 %
RAL 9006 30 %
All other RAL colours 70 %


Order example: WG–AL–1–U/1200×1150/S2–E6-C-31
MaterialAluminium
ConstructionInsect screen, galvanised steel, border without fixing holes
Nominal size1200 × 1150 mm
Installation subframeNone
User interfaceWith anodised finish to EURAS standard, E6-C-31, pale bronze





WG-BALE-R2/5500 × 1320/ER/P1 - RAL …
||||||||
12345678

1 Type
WG-B External weather louvre, for continuous horizontal runs of any width
 
2 Material
AL Aluminium
 
3 Section
No entry required: complete horizontal run, nominal size
E-R Right end section
E-L Left end section
M Middle section
 
4 Construction
No entry required: crimped wire mesh, galvanised steel
1 Insect screen, galvanised steel
2 Crimped wire mesh, stainless steel
3 Crimped wire mesh and insect screen, stainless steel
 
5 Front frame
No entry required: with holes
U without holes
 
6 Nominal size [mm]
B × H
For complete horizontal run:
B ≤ 4 m: 2 end sections (E)
B > 4 m: 2 end sections (E) and n middle sections (M)
 
7 Installation subframe
No entry required: none
ER with (not with unperforated front frame)
 
8 Surface
No entry required: raw aluminium
P1 powder-coated, specify RAL CLASSIC colour
S2 with anodised finish, specify EURAS standard colour (31 – 35)
S3 with anodised finish, E6-C-0, colour according to EURAS standard
 
Gloss level
RAL 9010 50 %
RAL 9006 30 %
All other RAL colours 70 %

Order example: WG-B–AL/4500×1980/ER
MaterialAluminium
Section1 right end section of 1250 mm, 1 middle section of 2000 mm, 1 left end section of 1250 mm
ConstructionCrimped wire mesh
Nominal size4500 × 1980 mm
Installation subframeWith
User interfaceStandard construction

Variants, Dimensions and weight, Product details

  • VARIANTS
  • DIMENSIONS AND WEIGHT
  • PRODUCT DETAILS

WG 

Variant 

  • External weather louvre made of galvanised sheet steel

Constructions

  • Galvanised sheet steel 
  • 1: With insect screen, galvanised steel U: Border without fixing holes 
  • 1 can be combined with U 

Parts and characteristics 

  • Front border Regular blades and bottom blade Crimped wire mesh Insect screen (optional) Visible mullion from B = 1385 mm 

Construction features 

  • Border, material thickness 1.5 mm 
  • Blades, material thickness 0.63 mm 
  • Crimped wire mesh at the rear, mesh aperture 20 × 20 × 1.8 mm
  • Optional insect screen at the rear, mesh aperture 1.25 × 1.25 × 0.4 mm 
  • Border fixing holes 

Materials and surfaces 

  • Border, mullion and blades made of formed galvanised sheet steel 
  • Crimped wire mesh made of galvanised steel 
  • P1: Powder-coated, RAL CLASSIC colour 
  • PS: Powder-coated, NCS or DB colour


WG-A2 

Variant 

  • External weather louvre made of stainless steel 

Constructions 

  • Stainless steel 
  • 3: with insect screen, stainless steel 
  • U: Border without fixing holes 
  • 3 can be combined with U

Parts and characteristics

  • Front border 
  • Regular blades and bottom blade 
  • Crimped wire mesh Insect screen, optional 
  • Visible mullion from B = 1385 mm 

Construction features 

  • Border, material thickness 1.5 mm 
  • Blades, material thickness 0.63 mm 
  • Crimped wire mesh at the rear, mesh aperture 20 × 20 × 1.8 mm 
  • Optional insect screen at the rear, mesh aperture 1.25 × 1.25 × 0.4 mm 
  • Border fixing holes 

Materials and surfaces 

  • Border, mullion, blades and crimped wire mesh made of stainless steel, material no. 1.4301 
  • P1: Powder-coated, RAL CLASSIC colour 
  • PS: Powder-coated, NCS or DB colour 


WG-AL 

Variant 

  • External weather louvre made of aluminium 

Constructions 

  • Aluminium 
  • 1: With insect screen, galvanised steel 
  • 2: With crimped wire mesh, stainless steel 
  • 3: With insect screen and crimped wire mesh, stainless steel 
  • U: Border without fixing holes 
  • 1, 2, 3 can be combined with U 

Parts and characteristics 

  • Front border 
  • Regular blades and bottom blade 
  • Crimped wire mesh Insect screen (optional) 
  • Stabilising mullion at the rear, from B = 1385 mm 

Construction features 

  • Border, material thickness 1.7 mm 
  • Blades, material thickness 1.35 mm 
  • Crimped wire mesh at the rear, mesh aperture 20 × 20 × 1.8 mm 
  • Optional insect screen at the rear, mesh aperture 1.25 × 1.25 × 0.4 mm 
  • Border fixing holes 

Materials and surfaces 

  • Border, stabilising mullion and blades made of extruded aluminium sections, material no. EN AW-6060 T66 
  • Crimped wire mesh made of galvanised steel 
  • P1: Powder-coated, RAL CLASSIC colour 
  • PS: Powder-coated, NCS or DB colour 
  • S2: With anodised finish, colour according to EURAS standard, E6-C-31 – E6-C-35 
  • S3: With anodised finish, colour according to EURAS standard, E6-C-0 


WG-B-AL 

Variant 

  • External weather louvre made of aluminium, for continuous horizontal runs 

Constructions 

  • Aluminium 
  • 1: With insect screen, galvanised steel 
  • 2: With crimped wire mesh, stainless steel 
  • 3: With insect screen and crimped wire mesh, stainless steel
  • U: Border without fixing holes 
  • 1, 2, 3 can be combined with U 

Parts and characteristics 

  • Front border 
  • Regular blades and bottom blade 
  • Crimped wire mesh Insect screen (optional) 
  • Stabilising mullion at the rear, from E/M = 1300 mm 

Construction features 

  • (up to B = 4000 mm) or two end sections plus any number of middle sections (from B = 4001 mm) 
  • Border, material thickness 1.7 mm 
  • Blades, material thickness 1.35 mm 
  • Crimped wire mesh at the rear, mesh aperture 20 × 20 × 1.8 mm 
  • Optional insect screen at the rear, mesh aperture 1.25 × 1.25 × 0.4 mm 
  • Border fixing holes 

Materials and surfaces 

  • Border, stabilising mullion and blades made of extruded aluminium sections, material no. EN AW-6060 T66 
  • Crimped wire mesh made of galvanised steel 
  • P1: Powder-coated, RAL CLASSIC colour 
  • PS: Powder-coated, NCS or DB colour 


Material

Part

Order code detail

Material

Part

Front border Formed sheet steel, galvanised Material thickness 1.5 mm
Front border A2

Stainless steel, material no. 1.4301

Material thickness 1.5 mm
Front border AL

Extruded aluminium sections, material no. EN AW-6060 T66

Material thickness 1.7 mm
Blades Formed sheet steel, galvanised Material thickness 0.63 mm
Blades A2

Stainless steel, material no. 1.4301

Material thickness 0.63 mm
Blades AL

Extruded aluminium sections, material no. EN AW-6060 T66

Material thickness 1.35 mm
Mullion Formed sheet steel, galvanised from B = 1385 mm
Mullion A2

Stainless steel, material no. 1.4301

from B = 1385 mm
Stabilising mullion AL

Extruded aluminium sections, material no. EN AW-6060 T66

from B = 1385 mm
Crimped wire mesh Galvanised steel
Crimped wire mesh 2

Stainless steel, material no. 1.4301

only WG-AL, WG-B-AL
Crimped wire mesh 3

Stainless steel, material no. 1.4301 o

only WG-A2, WG-AL, WG-B-AL
Insect screen 1 Galvanised steel only WG, WG-AL, WG-B-AL
Insect screen 3

Stainless steel, material no. 1.4301

only WG-A2, WG-AL, WG-B-AL


Surfaces

Part

Order code detail

Material

Part

Border and blades untreated 100
Border and blades P1-RAL ...

powder-coated, colour RAL ... CLASSIC


Border and blades PS-NCS ...

powder-coated, colour NCS ...


Border and blades S2

with anodised finish, colour to EURAS standard E6-C-31 – E6- C-35

only WG-AL, WG-B-AL
Border and blades S3

with anodised finish, colour to EURAS standard E6-C-0

only WG-AL, WG-B-AL
WG, WG-A2, weights [kg]

H [mm]

B [mm]

200

400

600

800

1000

1200

1400

1600

1800

2000

2200

2400

165345689111314151719
3303567911131415171920
49556891113161819212425
660679111316192122262830
8258912131618222426303336
99091013151821252830343841
1155111215172024283133394346
1320121416182226313537434852
1485141618202429343841475257
1650151620222731374144515762
18151718212429344045485662
198018192226313743485260
2145202123283339465256
23102123253035424955


WG, WG-A2, width subdivided, weights [kg]

H [mm]

B₁ [mm]

1900

2100

2300

2500

2900

3300

3700

4100

4500

4900

B [mm]

900

1000

1100

1200

1400

1600

1800

2000

2200

2400

16514151718222527303437
33016182021262830343840
49520222426323537434750
66024272931384244515761
82528313437444952606671
99032363942505659687682
115537404447566267778693
1320414448526269748695103
14854549535768768194105114
165049535863748389103114124
181553586368809096111124
1980576268738696104120
21456166727892103111
23106571778398110

WG, WG-A2, height subdivided, weights [kg]

H₁ [mm]

H [mm]

B [mm]

200

400

600

800

1000

1200

1400

1600

1800

2000

2200

2400

24101155212430334047566267778693
274013202428333744526269748695103
3070148527313741495768768194105114
34001650303240445363748389103114124
37301815333642485868809096111124
406019803638445262738696104120
4390214539424656667892103111
4720231042465060718398110


WG-AL, weights [kg]

H [mm]B [mm]
20040060080010001200140016001800200022002400
1652345678910111213
3302345678910111213
49534567891011141619
6604567810121415171922
82556781012141619212426
990678101215171921242730
11557810121416182124273033
132081012141618212427303336
1485101214161821242730333639
1650121416182124273033363942
18151416182124273033363942
198016182024273033363942
2145182022273033363942
23102022242933363942

WG-AL, width subdivided, weights [kg]
H [mm]B₁ [mm]
1900210023002500290033003700410045004900
B [mm]
900100011001200140016001800200022002400
16510111213151719212325
33011121314161820222426
49513141516182022283238
66015161820242830343844
82518202224283238424852
99022242730343842485460
115526283032364248546066
132030323436424854606672
148534363942485460667278
165039424548546066727884
1815454851546066727884
19805154576066727884
214557606366727884
2310626669727884


WG-AL, height subdivided, weights [kg]

H₁ [mm]

H [mm]

B [mm]

200

400

600

800

1000

1200

1400

1600

1800

2000

2200

2400

24101155141620242832364248546066
27401320162024283236424854606672
30701485202428323642485460667278
34001650242832364248546066727884
37301815283236424854606672788490
40601980323640485460667278849096
439021453640445460667278849096102
4720231040444858667278849096102108

WG-B-AL, weights [kg]
H [mm]M [mm]E [mm]
2000100012001400160018002000
165105678910
3301167891011
49514789101114
6601781012141517
82521101214161921
99024121517192124
115527141618212427
132030161821242730
148533182124273033
165036212427303336
181539242730333639
198042273033363942

WG, standard sizes, width B, no. of flange holes n

B [mm]

Number of holes n

T₁ [mm]

T₂ [mm]

200 1 100
400 2 240 80
600 2 440 80
800 2 640 80
1000 3 420 80
1200 3 520 80
1400 3 620 80
1600 4 480 80
1800 4 547 80
2000 4 613 80
2200 5 510 80
2400 5 560 80


WG, standard sizes, height H, no. of flange holes n

H [mm]

Number of holes n

T₃ [mm]

T₄ [mm]

165 1 83
330 1 165
495 1 248
660 1 330
825 1 413
990 1 495
1155 1 578
1320 2 445 437
1485 2 500 492
1650 2 555 547
1815 2 610 602
1980 3 499 491
2145 3 540 533
2310 3 581 574


WG, intermediate sizes, width B, no. of flange holes n

B [mm]

Number of holes n

T₁ [mm]

T₂ [mm]

165 – 384

1

B/2

385 – 881

2

B - 160

80

882 – 1481

3

(B - 160)/2

80

1482 – 2081

4

(B - 160)/3

80

2082 – 2399

5

(B - 160)/4

80


WG, intermediate sizes, height H, no. of flange holes n

H [mm]

Number of holes n

T₃ [mm]

T₄ [mm]

166 – 1319

1

H/2

1321 – 1979

2

(H + 15)/3

T₃ - 7.5

1981 – 2309

3

(H + 15)/4

T₃ - 7.5


WG-B-AL, standard sizes, width B, no. of flange holes n

End section E [mm]

Number of holes n

T₁ [mm]

T₂ [mm]

1000 3 410 80
1200 3 510 80
1400 4 407 80
1600 4 473 80
1800 4 540 80
2000 4 607 80


WG-B-AL, standard sizes, height H, no. of flange holes n

H [mm]

Number of holes n

T₃ [mm]

T₄ [mm]

165 1 83
330 1 165
495 1 248
660 1 330
825 1 413
990 1 495
1155 1 578
1320 2 445 437
1485 2 500 492
1650 2 555 547
1815 2 610 602
1980 3 499 491


WG-B-AL, intermediate sizes, width B, no. of flange holes n

End section E [mm]

Number of holes n

T₁ [mm]

T₂ [mm]

1001 – 1481

3

(E - 180)/2

80

1482 – 1999

4

(E - 180)/3

80


WG-B-AL, intermediate sizes, height H, no. of flange holes n

H [mm]

Number of holes n

T₃ [mm]

T₄ [mm]

1001 – 1319

1

H/2

1321 – 1979

2

(H + 15)/3

T₃ - 7.5


Installation and commissioning

  • Install with or without installation subframe (construction U only without installation subframe)
  • Install subdivided constructions either horizontally next to each other or vertically on top of each other
  • Install components of the continuous horizontal runs (end and middle sections) individually
  • Install louvres for large areas on a support structure (to be provided by others)


Downloads

product information

certificates

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34