WGF

External weather louvre, variant WGF-AL-T

WGF

SPECIFICALLY FOR FAÇADE INSTALLATION

External weather louvres – specifically for façade installation – as a protection of air conditioning systems against the direct ingress of rain, leaves and birds into fresh air and exhaust air openings.

Maximum width of 2000 mm, maximum height of 2500 mm per section
For installation into façades or for the construction of enclosures for machinery or electrical equipment
Low differential pressure due to aerofoil blades
Low air-regenerated noise
All aerodynamic data is measured in aerodynamics and acoustics laboratories
Variants made of galvanised sheet steel or aluminium
Flexible arrangement of sections for covering large areas (should to be fixed on the support structure provided by others)

Optional equipment and accessories

Corner section
Insect screen
Powder-coated or with anodised finish

General Information

Application

External weather louvres for fresh air and exhaust air openings of ventilation and air conditioning systems
Protection against the direct ingress of rain as well as against leaves and birds
Recommended face velocity for fresh air openings 2 – 2.5 m/s max.

Special features

Low differential pressure and low noise due to aerofoil blades
Large-size covering of air intake and discharge openings on external walls and of complete façades with a uniform look with regular blades, without obstructive borders
Robust construction
Very large dimensions (height and width) are available as any number of sections can be fitted side by side or on top of each other (support structure required)

Nominal sizes

Middle section

B: 1000, 1200, 1400, 1600, 1800, 2000 mm (intermediate sizes: 201 – 1999 mm, in increments of 1 mm)
H: 500, 625 , 750, 875, 1000, 1250, 1500, 1750, 2000, 2250, 2500 mm (intermediate sizes: 1125 – 2375 mm in increments of 125 mm)
Any combination of B × H

Corner section

B: 600 × 600 mm (angle)
H: 500, 625 , 750, 875, 1000, 1250, 1500, 1750, 2000, 2250, 2500 mm (intermediate sizes: 1125 – 2375 mm in increments of 125 mm)

Variants

WGF-T: Façade weather louvre made of galvanised sheet steel, middle section
WGF-E: Façade weather louvre made of galvanised sheet steel, corner section
WGF-AL-T: Façade weather louvre made of aluminium, middle section
WGF-AL-E: Façade weather louvre made of aluminium, corner section

Construction

Crimped wire mesh made of galvanised steel
2: Crimped wire mesh, stainless steel (only WGF-AL)

Parts and characteristics

Serrated angle sections (left and right)
Regular blades and bottom blade
Crimped wire mesh
Insect screen (optional)
Fixing elements for the blades, serrated angle section (if B > 2000 mm: combination of several serrated angle sections) and crimped wire mesh

Construction features

Serrated angle section, with fixing holes on side and rear, material thickness 3 mm
Crimped wire mesh at the rear, mesh aperture 20 × 20 × 1.8 mm
Optional insect screen at the rear, mesh aperture 1.25 × 1.25 × 0.4 mm

Materials and surfaces

Blades made of formed, galvanised sheet steel or extruded aluminium sections
Serrated angle sections made of formed, galvanised sheet steel
Crimped wire mesh made of galvanised steel
Serrated angle sections, powder-coated black (RAL 9005)
P1: powder-coated, RAL CLASSIC colour
PS: powder-coated, NCS or DB colour

Maintenance

Maintenance-free, as construction and materials are not subject to wear

Description

Variants

WGF-T: Façade weather louvre made of galvanised sheet steel, middle section
WGF-E: Façade weather louvre made of galvanised sheet steel, corner section
WGF-AL-T: Façade weather louvre made of aluminium, middle section
WGF-AL-E: Façade weather louvre made of aluminium, corner section

Parts and characteristics

Serrated angle sections (left and right)
Regular blades and bottom blade
Crimped wire mesh
Insect screen (optional)
Fixing elements for the blades, serrated angle section (if B > 2000 mm: combination of several serrated angle sections) and crimped wire mesh

Accessories

Construction features

Free area of approx. 50 %
Serrated angle section, with fixing holes on side and rear, material thickness 3 mm
Wire mesh at the rear, mesh aperture 20 × 20 × 1.8 mm
Optional insect screen at the rear, mesh aperture 1.25 × 1.25 × 0.4 mm

Materials and surfaces

Blades made of formed galvanised sheet steel or extruded aluminium sections
Serrated angle sections made of formed galvanised sheet steel
Wire mesh made of galvanised steel
Serrated angle sections, powder-coated black (RAL 9005)
P1: Powder-coated, RAL CLASSIC colour
PS: Powder-coated, NCS or DB colour

Nominal sizes

Middle section

B: 1000, 1200, 1400, 1600, 1800, 2000 mm (intermediate sizes: 201 – 1999 mm, in increments of 1 mm)
H: 500, 625 , 750, 875, 1000, 1250, 1500, 1750, 2000, 2250, 2500 mm (intermediate sizes: 1125 – 2375 mm in increments of 125 mm)
Any combination of B × H

Corner section

B: 600 × 600 mm (angle)
H: 500, 625 , 750, 875, 1000, 1250, 1500, 1750, 2000, 2250, 2500 mm (intermediate sizes: 1125 – 2375 mm in increments of 125 mm)

Technical information

Function, Technical data, Quick sizing, Specification text, Order code

Schematic illustration of WGF

① Bottom blade

② Regular blades

③ Fixing element for crimped wire mesh

④ Serrated angle section, right side

⑤ Serrated angle section, left side

⑥ Fixing holes

⑦ Fixing element to join serrated angle sections

⑧ Crimped wire mesh; additional insect screen as an option

⑨ Fixing element for blades

⑩ Middle section WGF-AL-T

⑪ Corner section WGF-AL-E

External weather louvres are externally mounted air transfer devices for the fresh air and exhaust air of air conditioning systems. They are installed in external walls and façades. Their narrowly arranged blades give good protection against the direct ingress of rain as well as against leaves and birds. Under certain unfavourable conditions, such as heavy rain, and depending on the airflow velocity, slight quantities of water could enter with the air. This is why the airflow velocity in fresh air openings should not exceed 2 – 2.5 m/s.

Dimensions and weight, Product details

WGF, middle section

WGF-T, weights [kg]

H [mm]	B [mm]
H [mm]	500	600	800	1000	1200	1400	1600	1800	2000
375	8	9	10	12	13	15	16	18	19
500	11	12	14	16	17	19	21	23	25
625	13	14	17	19	22	24	26	29	31
750	16	17	20	23	26	28	31	34	37
875	18	20	23	27	30	33	36	40	43
1000	21	23	26	30	34	38	41	45	49
1125	23	25	30	34	38	42	47	51	55
1250	26	28	33	38	42	47	52	56	61
1375	28	31	36	41	46	52	57	62	67
1500	31	34	39	45	51	56	62	67	73
1625	33	36	42	49	55	61	67	73	79
1750	36	39	46	52	59	65	72	78	85
1875	38	42	49	56	63	70	77	84	91
2000	41	45	52	60	67	75	82	90	97
2125	43	47	55	63	71	79	87	95	103
2250	46	50	58	67	75	84	92	101	109
2375	48	53	62	71	79	88	97	106	115
2500	51	55	65	74	84	93	102	112	121

WGF-AL-T, weights [kg]

H [mm]	B [mm]
H [mm]	500	600	800	1000	1200	1400	1600	1800	2000
375	7	8	9	9	10	11	11	12	13
500	10	10	11	12	13	14	15	16	17
625	12	12	13	15	16	17	19	20	21
750	14	14	16	18	19	21	22	24	26
875	16	16	18	20	22	24	26	28	30
1000	18	19	21	23	25	27	30	32	34
1125	20	21	23	26	28	31	33	36	38
1250	22	23	26	29	31	34	37	40	43
1375	24	25	28	31	34	38	41	44	47
1500	26	27	31	34	37	41	44	48	51
1625	28	29	33	37	41	44	48	52	55
1750	30	32	36	40	44	48	52	56	60
1875	32	34	38	42	47	51	55	60	64
2000	34	36	40	45	50	54	59	64	68
2125	36	38	43	48	53	58	63	68	72
2250	38	40	45	51	56	61	66	71	77
2375	40	42	48	53	59	64	70	75	81
2500	42	44	50	56	62	68	74	79	85

WGF, corner section, weights [kg]

B [mm]: 600 × 600

H [mm]	WGF-E	WGF-AL-E
375	13	10
500	17	13
625	21	16
750	25	19
875	30	22
1000	34	25
1125	38	28
1250	42	31
1375	46	34
1500	50	37
1625	55	40
1750	59	43
1875	63	46
2000	67	49
2125	71	52
2250	75	55
2375	79	58
2500	84	61

Downloads

product information

Product data sheet Type WGF

WGF_PD_2024_01_09_DE_en Product data sheet 430 KB pdf

certificates

Non-CE Manufacturer's statement WGF

WGF_NotCE_2022_02_08_14_06_39_DE_en Certificate 1,7 MB pdf

operation manuals

Installation manual Type WGF

WGF_IM_CD10023_V1_2024_01_GB_en Installation manual 1,6 MB pdf

By clicking the button, you allow us to provide you with an excellent website experience and easy shopping processes. These cookies include ones that are necessary for the operation of the site and for the control of our services and applications, as well as ones that are used solely for statistical purposes, for convenience settings or to display personalized content. You can decide which categories you want to allow and you can adjust the data utilisation settings based on your individual requirements. Please note that, depending on the settings that you have selected, all functionalities of the page might not be available. You can change your selection at any time.

TECHNICALLY NECESSARY

These cookies are necessary for the proper functioning of our website and cannot be disabled. As a rule, these cookies are set only in response to actions taken by you, such as setting your privacy preferences or filling the shopping cart. In addition, security-relevant functionalities or support via a dedicated webchat are integrated, including all session cookies from TROX set after you log in as a customer. You can set your browser to block these cookies or notify you about them. As a result, however, some areas of the website might not function as intended.

Nominal sizes (middle section)	1000 × 500 – 2000 × 2500 mm
Volume flow rate range (middle section)	940 – 11880 l/s or 3384 – 42768 m³/h

Material	Galvanised steel
Section	Middle section
Construction	Crimped wire mesh, galvanised steel
Nominal size	1600 × 1250 mm
User interface	Powder-coated, RAL 7001, silver

SPECIFICALLY FOR FAÇADE INSTALLATION

General Information

Description

Technical information

Function, Technical data, Quick sizing, Specification text, Order code

Dimensions and weight, Product details

Downloads

product information

Product data sheet Type WGF

certificates

Non-CE Manufacturer's statement WGF

operation manuals

Installation manual Type WGF

TROX Services

TECHNICALLY NECESSARY

STATISTICS AND WEBSITE ANALYSIS

CONVENIENCE AND PERSONALISATION

FOR THE BEST TROX EXPERIENCE