00136353_0
Volume flow rate measuring unit, variant VMLK, with nozzle and flange


00134750_0
Variant with bluff body and flange


00134614_0
Variant with nozzle and connecting circular spigot


00136085_0
Easy cleaning of sensor tubes


00132715_0
Tested to VDI 6022


00136353_0
00134750_0
00134614_0
00136085_0
00132715_0

VMLK

FOR THE MEASUREMENT OF VOLUME FLOW RATES IN DUCTS WITH CONTAMINATED AIR FROM LABORATORIES

Plastic circular volume flow rate measuring units for the recording or monitoring of volume flow rates

  • Permanent volume flow rate measuring
  • Recording of measured values and use for slave controllers
  • For combination with LABCONTROL control components
  • Volume flow rate control for fume cupboards by signalling to frequency converters
  • Measurement accuracy ± 5 % even with unfavourable upstream conditions
  • Casing made of flame-resistant polypropylene (PPs)
  • Casing air leakage to EN 15727, class C


Optional equipment and accessories

  • With flanges on both ends

Application

  • Circular LABCONTROL volume flow rate measuring units Type VMLK for the automatic measurement of volume flow rates from fume cupboards and fume hoods
  • Suitable for contaminated air
  • Volume flow rate control for fume cupboards by signalling to frequency converters
  • Simplified commissioning, approval and maintenance
  • Suitable for permanent installation because of low differential pressure


Special features

  • High measurement accuracy with any upstream conditions
  • Effective pressure range: approx. 5 – 250 Pa


Nominal sizes

  • Bluff body: 250 – 100, 250 – 160
  • Nozzle: 250 – D08, 250 – D10, 250 – D16
  • Bluff body available in two sizes and nozzle available in three sizes for different volume flow rate ranges

Description

Variants
  • VMLK: Volume flow rate measuring unit
  • VMLK-FL: Volume flow rate measuring unit with flanges on both ends


Parts and characteristics
  • Ready-to-commission unit which consists of mechanical parts and control components.
  • Averaging differential pressure sensor for volume flow rate measurement; can beremoved for cleaning
  • Factory-assembled control component complete with tubing


Attachments
  • LABCONTROL: Control components for air management systems


Accessories
  • Matching flanges for both ends, including seals


Construction features
  • Circular casing
  • Spigot suitable for ducts according to DIN 8077
  • Short casing: 392 mm without flange, 400 mm with flange


Materials and surfaces
  • Casing made of flame-resistant polypropylene (PP), flame retardant (V-0) to UL 94
  • Differential pressure sensor (with bluff body, or nozzle) and plain bearing made of polypropylene (PP)


Standards and guidelines
  • Hygiene conforms to VDI 6022
  • Casing air leakage to EN 15727, class C


Maintenance
  • Maintenance-free as construction and materials are not subject to wear
  • Zero point correction of the static differential pressure transducer should be carried out once per year (recommendation)

Technical information

  • Function
  • TECHNICAL DATA
  • SPECIFICATION TEXT
  • ORDER CODE
  • VARIANTS
  • DIMENSIONS AND WEIGHT
Schematic illustration of the VMLK Schematic illustration of the VMLK
① Flange
② Casing
③ Sticker showing the correct installation orientation
④ Control equipment
⑤ Sensor head
⑥ Effective pressure sensor
⑦ Bluff body
The measuring unit is fitted either with a bluff body
and a differential pressure sensor or with a nozzle.
The control components (attachments) include a
differential pressure transducer that transforms
the differential pressure (effective pressure) into
an electric signal, and a controller.

  • Fume cupboard control: The volume flow rate setpoint depends on the control strategy for the fume cupboard control and is based on the face velocity, the sash position, or a constant value.
  • Volume flow control: The volume flow rate setpoint comes from an external unit or device.


The controller compares the actual value with the setpoint value and alters the control signal of the frequency converter or of the actuator if there is a difference between the two values.
Circular volume flow rate measuring unit made of flame-resistant plastic for the measurement of volume flow rates in variable air volume systems and fume cupboards. Suitable for the permanent monitoring of the volume flow rate (actual value signal) of extract air containing aggressive media since all components coming into contact with the airflow are made of plastic (no interior metal parts). Measurement accuracy ± 5 % even with unfavourable upstream and downstream conditions. Suitable also for volume flow rate control by signalling to frequency converters. Ready-to-commission unit which consists of the casing with either averaging effective pressure sensor and bluff body or with nozzle, and an electronic controller. Differential pressure sensor with 3 mm measuring holes (resistant to dust and pollution) Spigot, suitable for ducts according to DIN 8077. Casing air leakage to EN 15727, class C.


Special features

  • High measurement accuracy with any upstream conditions
  • Effective pressure range: approx. 5 – 250 Pa


Materials and surfaces

  • Casing made of flame-resistant polypropylene (PP), flame retardant (V-0) to UL 94
  • Differential pressure sensor (with bluff body, or nozzle) and plain bearing made of polypropylene (PP)


Technical data

  • Nominal sizes: 250 mm
  • Volume flow rate range: 30 to 515 l/s or 108 to 1854 m³/h
  • Measurement accuracy ± 5 % even with unfavourable upstream and downstream conditions.
  • Effective pressure range: approx. 5 – 250 Pa
  • Measuring unit differential pressure (pressure loss): 19 – 65 % of the measured effective pressure
  • Operating temperature: 10 to 50 °C


Attachments

Volume flow rate control with electronic EASYLAB

controller for fume cupboards.

  • Supply voltage 24 V AC
  • Static differential pressure measurement
  • Easy commissioning due to plug and play communication system
  • Controller is a modular system and can be expanded
  • Volume flow rate monitoring


Sizing data

  •  V _______________________ [m³/h]

Notes on the order code
VMLK/.../ELAB/FH-*
  • VMR volume flow rate measuring units with EASYLAB TCU3 controllers are not certified for use with fume cupboards to EN 14175, part 6 (Fume cupboards – Variable air volume fume cupboards)
VMLK
Application
  • Plastic circular volume flow rate measuring units for volume flow rate measurement
  • Spigot to make connections to the ducting


VMR-FL

  • Volume flow rate measuring unit
  • With flanges on both ends to make detachable connections to the ducting

Downloads

certificates

production {"X-Frame-Options"=>"SAMEORIGIN", "X-XSS-Protection"=>"1; mode=block", "X-Content-Type-Options"=>"nosniff", "X-Download-Options"=>"noopen", "X-Permitted-Cross-Domain-Policies"=>"none", "Referrer-Policy"=>"strict-origin-when-cross-origin", "Content-Security-Policy"=>"frame-ancestors 'self' https://api.scrivito.com https://punchoutcommerce.com https://www.trox.de https://trox-extern.com https://psp40.onventis.com https://psp22.onventis.com https://trox4u.troxgroup.com", "Strict-Transport-Security"=>"max-age=31536000; includeSubDomains", "Content-Type"=>"text/html; charset=utf-8"}

Share page

Recommend this page

Recommend this page by sending a link by mail.

Fields marked with an (*) are required fields.

Share page

Thank you for your recommendation!

Your recommendation has been sent and should arrive shortly.

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34

Contact

We are here for you

Please specify your message and type of request.
Tel.: +43 1 250 43-0 | Fax: +43 1 250 43 34

Attachment (max. 10MB)

Fields marked with an (*) are required fields.

Contact

Thank you for your message!

Your message is send and will be processed shortly.
Our department for Service-Requests will contact you asap.
For general question regarding products or services you can also call:
Tel.: +43 1 250 43-0| Fax: +43 1 250 43 34